Mechanical Air Eliminator

Liquid Controls mechanical vapour and air eliminators remove air and vapor from metering systems.

 

Removing the air and vapor from a metering system increases the accuracy of the meter by allowing only liquid to pass through the meter for measurement.

At installation, LC mechanical vapour and air eliminators are piped to a storage tank to provide a pathway and a receptacle where the evacuated air and vapor can be deposited. After the air (or vapor) has left the metering system, mechanical air and vapor eliminators seal off the pathway to prevent liquid from entering the storage tank.

LC Mechanical Air Eliminator

Applications

The Liquid Controls Air Eliminator can be used across a range of applications including;

– Aviation
– General Industrial
– Marina
– Other Mobile Applications
– Terminal & Bulk Plant
– Truck

Mechanical Air Eliminator Specifications

Aluminum 150psi for use with M5, M7, M10, M15, M25, M30, M40 and M-60 Meters.

Materials of construction for Classes 1, 2, 3, 4, 14, 15, 16 and 30 applications.

Designed for installation of F7, F-15 and F-30 Strainers.

Aluminum high pressure for use with 350 PSI, MA4, MA5, MA7 and MA15 Meters.

Materials of construction for Class 10 LPG Service. Other Classes available on special order, including class 12 NH3. Relief valve provided as required for Classes 10 and 12 applications.

Cast iron 150psi for use with M7 meters.

Materials of construction for Classes 7, 27 and 37 applications.

Designed for installation on F7 Class 7 Strainers.

Stainless steel 150psi for use with M5 and M7 Meters.

Materials of construction for Class 8 applications.

Designed for installation on F7, Class 8 Strainer.

Downloads

Images

LC Mechanical Air Eliminator