Our series of ‘How To’ videos and documents cover some of the frequently asked questions we are asked. Technical information on our products can be found on the product pages or on our Technical Specifications page.

If your query is not covered here, please do get in touch on 01296 619510 or email sales@alpeco.co.uk.

If you have any questions you think could be answered with a short video, please email us at sales@alpeco.co.uk. with your suggestions.

How to select the correct flow meter model
How to select the correct Hydrovalve?

What is the passcode to access the parameter list on the Lectrocount TE550 register?

To access the full parameter list on the Lectrocount TE550 register, enter 09 and then enter the passcode 161249.

This will enable you to change parameter settings for example changing the time.

What is the passcode to access the parameter list on TE550 Truck III register

To access the full parameter list on the TE550 Truck III register, enter 09 and then enter the passcode 222222.

This will enable you to change parameter settings for example changing the time.

How to retrieve an old ticket on a Truck III register

How to change the clock on Lectrocount meter

How to change the time on a TE550 meter

1. Print off any current meter delivery
2. Display shows duplicate yes/no, select no, press enter
3. Display shows diesel etc.. press 0 and 9 button together
4. Display asks for code, enter 1-6-1-2-4-9 and enter
5. Display shows series of sub-headings, select time/date, press enter
6. Display shows time OR date, e.g. select time and enter
7. Display shows current time and new time, press clear and write in new time using number keys and press enter
8. Press clear button , display shows sub-headings column, perameters etc..
9. Press 0 and 9 button together to leave calibration file

How to reset the time on a Liquid Controls Truck III register

How to add the vehicle registration number to the bottom of an LC3 ticket
How to enter the vehicle registration number into a Liquid Controls Truck III register

How to enter a new load and view inventory on a Liquid Controls Truck III register

How to add an extra line to bottom of LC3 ticket
How to add a line space to a printed ticket from a Liquid Control Truck III Register

How to display LectroCount end of shift tickets

How to print end of shift ticket on TE550 meter

1. TE550 display shows “DUPLICATE YES/NO”, press ENTER
2. TE550 display shows “DIESEL/KERO/GAS OIL” etc.. Press CLEAR/EXIT button
3. TE550 display shows “CLOSE SHIFT”, YES/NO. Select YES using F3/F4 buttons.  Insert ticket into printer and press ENTER
4. After ticket has finished printing, TE550 display reads  “DUPLICATE YES/NO”, press ENTER (to conclude operation)

How to display Lectrocount totaliser readings

How to turn the Lectrocount backlight on and off

How to change the language on Lectrocount meter

Find a previous delivery on a TE550 meter

In order to find a previous delivery, please operate the TE550 as follows:

  1. Duplicate yes/no? Select no and enter
  1. Press 0 &9 together, code? Press 1 6 1 2 4 9 & enter
  1. Select event from list & enter
  1. Show/close shift? Select show & enter
  1. From table select delivery &enter
  1. Overwrite start date & finish date. Select product (use F1/F2 to select) & press enter
  1. Select appropriate delivery (highlighted by box) &enter
  1. Press F1 to print, press enter to start print
  1. Press clear/exit repeatedly until perameter sub-heading is restored, press 0&9 to escape cal. mode

If your query is not covered here, please do get in touch on

01296 619510 sales@alpeco.co.uk