FAQs

 

Our series of ‘How To’ videos and documents cover some of the frequently asked questions we are asked.  Technical information on our products can be found on the product pages or on our Technical Specifications page.

If your query is not covered here, please do get in touch on 01296 619510 or email sales@alpeco.co.uk.

If you have any questions you think could be answered with a short video, please email us at sales@alpeco.co.uk with your suggestions.

To access the full parameter list on the Lectrocount TE550 register, enter 09 and then enter the passcode 161249.

This will enable you to change parameter settings for example changing the time.

To access the full parameter list on the TE550 Truck III register, enter 09 and then enter the passcode 222222.

This will enable you to change parameter settings for example changing the time.

1. Print off any current meter delivery
2. Display shows duplicate yes/no, select no, press enter
3. Display shows diesel etc.. press 0 and 9 button together
4. Display asks for code, enter 1-6-1-2-4-9 and enter
5. Display shows series of sub-headings, select time/date, press enter
6. Display shows time OR date, e.g. select time and enter
7. Display shows current time and new time, press clear and write in new time using number keys and press enter
8. Press clear button , display shows sub-headings column, perameters etc..
9. Press 0 and 9 button together to leave calibration file

1. TE550 display shows “DUPLICATE YES/NO”, press ENTER
2. TE550 display shows “DIESEL/KERO/GAS OIL” etc.. Press CLEAR/EXIT button
3. TE550 display shows “CLOSE SHIFT”, YES/NO. Select YES using F3/F4 buttons.  Insert ticket into printer and press ENTER
4. After ticket has finished printing, TE550 display reads  “DUPLICATE YES/NO”, press ENTER (to conclude operation)

In order to find a previous delivery, please operate the TE550 as follows:

  1. Duplicate yes/no? Select no and enter
  1. Press 0 &9 together, code? Press 1 6 1 2 4 9 & enter
  1. Select event from list & enter
  1. Show/close shift? Select show & enter
  1. From table select delivery &enter
  1. Overwrite start date & finish date. Select product (use F1/F2 to select) & press enter
  1. Select appropriate delivery (highlighted by box) &enter
  1. Press F1 to print, press enter to start print
  1. Press clear/exit repeatedly until perameter sub-heading is restored, press 0&9 to escape cal. mode